Factors Related to Ground Support Equipment (GSE) Damage (Case Study PT Gapura Angkasa Makassar)
Faktor-Faktor yang Berhubungan dengan Kerusakan Ground Support Equipment (GSE) (Studi Kasus PT Gapura Angkasa Makassar)
Abstract
Human factors or work behavior, characteristics or work environment factors, equipment and material factors and work method factors are sources that cause accident risk. PT Gapura Angkasa Sultan Hasanuddin Airport has hundreds of employees, in the GSE Division. Judging from the process during operation, GSE is not free from danger and risk. This indicates that there is a cause of damage to the GSE so that the stability of workers continues to run well and the smooth operation of aircraft and passengers. This research aims to determine factors related to damage to Ground Support Equipment (GSE) at PT Gapura Angkasa Makassar. This research method is an analytical observational study using a cross sectional research design. The population in this study is the total number of engineering workers.The sample in this study consisted of 44 GSE operators who were determined using the total sampling method where all members of the population were used as samples and the data collected was analyzed using the chi squared test. The results of the analysis using the chi squared test showed that the knowledge variable was not related to GSE damage (p=0.143), attitudes were not related to GSE damage (p=0.062), actions were related to GSE damage (p=0.039), unsafe action (unsafe action) not related to GSE damage (p=0.277), and unsafe conditions not related to GSE damage (p=0.038). It can be concluded that the attitude and unsafe condition variables have a relationship to GSE damage and the knowledge, action and unsafe action variables have no relationship to GSE damage. It can be concluded that the unsafe action variable is an intervening variable for the influence of work shifts, work fatigue, on work accidents. It is hoped that future researchers will expand the population and sample size to obtain better research results
References
Sinaga, et al. 2014. Identification and Analysis of Work Accident Risks Using FMEA (Failure Mode And Effect Analysis) and FTA (Fault Tree Analysis) Methods on the Surabaya – Mojokerto Toll Road Project. Pomits Engineering Journal. Vol 1(1).
Lake, Wenfridus, R. R., Hadi, Sugianto., Sutriningsih, Adi. 2017. Relationship between behavioral components (knowledge, attitudes, actions) of smoking among students. Nursing News. Vol 2(3): 843-856.
Pasaribu, 2017. Failure Mode and Effect Analysis (Fmea) and Fault Tree Analysis (Fta) Methods to Identify Potential and Causes of Work Accidents on Building Projects. UAJY e-journal.
Listyandini.R, & Tjipt, S. 2019. Factors Associated with Unsafe Actions among Workers at the NPK Fertilizer Factory. HEARTY Journal of Public Health, Vol. 7(1): 18-27.
Nofiyanti, Ayu. L., Rengganis, Dyah., Lusina., Lusina, Septia. 2015. The Relationship Between Knowledge and Attitude. Medical Journal of Lampung University. Vol. 4 (8).
Sangaji, J, Siswi J, & Daru L. Factors Associated with Unsafe Behavior of PT X Shipyard Hull Workers. Undip Public Health Journal (e-Journal). 2018; 6(5): 563-571.
Shidiq, S, Atjo W, & Masyitha Muis. The Relationship between Employee K3 Perceptions and Unsafe Behavior in the Production Section of Unit IV PT. Tonasa Cement. MKMI Journal. 2014: 110-116.
Pratama, A.K. 2015. The Relationship between Worker Characteristics and Unsafe Actions in Loading and Unloading Workers at PT. Surabaya Container Terminal. The Indonesian Journal of Occupational Safety and Health. Vol. 4(1): 64-73
Notoatmodjo, Soekidjo. 2010. Health Promotion Theory and Application: Rineka Cipta.
Fikra Wahyuni, 2019. Description of Knowledge, Attitudes and Actions Regarding the Use of Personal Protective Equipment among Workers in the Apron Section at PT. Angkasa Gapura Sultan Hassanudin Airport, Makassar.
L. Aryanto, Ekawati, and B. Kurniawan, "The Relationship between Training, Work Status, Educational Background, and Use of Personal Protective Equipment with the Occurrence of Work Accidents in Total Indonesian E&P," Journal of Public Health, vol. 4, no. 3, pp. 457–467, 2019.
Simanjuntak. Ferry. M. P. 2014. Analysis of Factors that Influence Fishermen's Acceptance of Menergy Gamma Drilling Exploration Activities in the Ujung Kulon Block.
Syah, Ahmad, N. A., & Mirwan, M. 2022. The Relationship between Worker Characteristics, K3 Knowledge Level, K3 Attitude, Unsafe Action, and Unsafe Conditions with Work Accidents in the Surabaya Animal Feed Industry. Envirous Journal. Vol 2 (2): 2777-1032, pp 78-85.
Doni, H. 2012. The Influence of Unsafe Behavior and Unsafe Conditions on Work Accidents and Damage in the PT Environment. Freya Abadi Indotama in 2012.
F. A. Ramadhany and T. Y. R. Pristya, "Factors Related to Unsafe Action on Workers in the Production Section of PT Lestari Banten Energi," Public Health Scientific Journal, vol. 11, no. 2, pp. 199–205, 2018.
Anizar. 2009. Occupational Safety and Health Engineering in Industry. Yogyakarta: Graha Ilmu.
Irawati, Ice. 2018. The Relationship between Unsafe Conditions and Unsafe Actions with Work Accidents and Damage in the PT X Welding Process, Batam City. Health Journal. Vol 9 (2): 2088-0278.
Fitria, Umamah, N. 2016. Analysis of Unsafe Action and Unsafe Conditions with Work Accidents and Equipment Damage at Jatindo Ukir Jepara in 2016. Thesis: Faculty of Health, Dian Nuswantoro University.
